I need some work done

by Hogg Sun Sep 11, 2011 7:18 pm

Hogg: Posts : 149
Reputation : 0
Join date : 2011-03-28
Age : 38
Location : Columbia

Post n°1

I need some work done

Post by Hogg Sun Sep 11, 2011 7:18 pm

As title states, I need work done! Truck is bagged with 20s but sits on the fender. I need to find someone who knows WTF they are doing, lay it flat and keep the ac and heat. I don't like the cold and ac usually isn't a big deal to me, but 2 scrapin the coast back to back without ac sucked! So I'd like to be able to keep it.

Anybody have any suggestions on where I can get it done without spending an arm and a leg. Also got some body work needing to be done, including a raised bed floor.

For those of you who don't know. Truck is a 98 s10, 2.2L with 5 speed. Going to have to change brake booster and move the clutch res.

Thanks.

by **DMAC** Sun Sep 11, 2011 8:21 pm

DMAC

DMAC: Admin; Posts : 1041
Reputation : 7
Join date : 2011-03-24
Age : 34
Location : Picayune, Mississippi

Post n°2

Re: I need some work done

Post by DMAC Sun Sep 11, 2011 8:21 pm

We won't be able to do any of the body work but, let me check with the rest of the Mob Starz and see if everyone would be down with taking this job. If so we will give you a quote. How does that sound?

by Hogg Sun Sep 11, 2011 9:06 pm

Hogg

Hogg: Posts : 149
Reputation : 0
Join date : 2011-03-28
Age : 38
Location : Columbia

Post n°3

Re: I need some work done

Post by Hogg Sun Sep 11, 2011 9:06 pm

Aight sounds good. It's a bitch doing the AC and slave cylinder. If it wasn't I would have done it 2 and a half years ago when we bagged the truck. I've got one guy who quoted me 300 just labor, but that was no Ac.

by **DMAC** Sun Sep 11, 2011 9:12 pm

DMAC

DMAC: Admin; Posts : 1041
Reputation : 7
Join date : 2011-03-24
Age : 34
Location : Picayune, Mississippi

Post n°4

Re: I need some work done

Post by DMAC Sun Sep 11, 2011 9:12 pm

I will definitely get back with you on that sir.

by billdubby Mon Sep 12, 2011 10:19 am

billdubby

billdubby: Posts : 142
Reputation : 1
Join date : 2011-07-24
Age : 42
Location : carriere ms

Post n°5

Re: I need some work done

Post by billdubby Mon Sep 12, 2011 10:19 am

warehouse customs give us a call
eric 985-285-2710
bill 601-590-0561

by Hogg Mon Sep 12, 2011 4:21 pm

Hogg

Hogg: Posts : 149
Reputation : 0
Join date : 2011-03-28
Age : 38
Location : Columbia

Post n°6

Re: I need some work done

Post by Hogg Mon Sep 12, 2011 4:21 pm

Where are yall located at? I don't hardly get enough time to call anybody. Service around here sucks. Just a rough estimated quote for the front end will work if you can get me one. Thanks

by billdubby Mon Sep 12, 2011 10:42 pm

billdubby

billdubby: Posts : 142
Reputation : 1
Join date : 2011-07-24
Age : 42
Location : carriere ms

Post n°7

Re: I need some work done

Post by billdubby Mon Sep 12, 2011 10:42 pm

we are in slidell, la i will get u a quote, what all do u want done?

by Hogg Tue Sep 13, 2011 3:56 pm

Hogg

Hogg: Posts : 149
Reputation : 0
Join date : 2011-03-28
Age : 38
Location : Columbia

Post n°8

Re: I need some work done

Post by Hogg Tue Sep 13, 2011 3:56 pm

For now just get the truck laid flat in the front. Cluth res will need to be moved. Will need a smaller brake booster or hydroboost. It has 2" drop spindles but stock control arms. I know they will need to be pie cut and de-humbed. Will have to notch for the tie rods. Firewall will need to be tubbed. And I want to keep the ac and heat so a new blower box will need to be built to lay for 20s.