Custom Trucks Of The O' So Dirty South


    96 tacoma re-notch

    Share
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    96 tacoma re-notch

    Post by foreman on Wed Apr 20, 2011 9:43 pm

    well its not completely finished but im still working on getting it cleaned up and fixing all the nigger rigging on it so heres how it site right now.


















    this is the tiny notch the truck had before




    tomorrow im putting on the notch and hopefully most of the four link so it should be close to finished tomorrow..
    avatar
    Popps

    Posts : 213
    Reputation : 1
    Join date : 2011-04-18

    Re: 96 tacoma re-notch

    Post by Popps on Wed Apr 20, 2011 11:20 pm

    Try and get your bars at the same angle or at least as close as you can that way you don't have alot of pinion angle change
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Wed Apr 20, 2011 11:23 pm

    Thanks and on a triangulated 4 link do the top and bottom bars have to be parallel?
    avatar
    Popps

    Posts : 213
    Reputation : 1
    Join date : 2011-04-18

    Re: 96 tacoma re-notch

    Post by Popps on Wed Apr 20, 2011 11:27 pm

    That's what I was talking about....when you set up the bottom (or straight) bars...try and get the top (or Trangulated) bars at the same angle. that way your pinion isn't changing angle alot.
    avatar
    DMAC
    Admin

    Posts : 1041
    Reputation : 7
    Join date : 2011-03-24
    Age : 27
    Location : Picayune, Mississippi

    Re: 96 tacoma re-notch

    Post by DMAC on Wed Apr 20, 2011 11:29 pm

    So Yes they need to be as parellel as possible. And pops im back on sorry i had to go smoke a cig.


    _________________
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Wed Apr 20, 2011 11:34 pm

    Ight thanks a lot man
    avatar
    DMAC
    Admin

    Posts : 1041
    Reputation : 7
    Join date : 2011-03-24
    Age : 27
    Location : Picayune, Mississippi

    Re: 96 tacoma re-notch

    Post by DMAC on Wed Apr 20, 2011 11:36 pm

    If you have any questions about your truck Popps is who you need to talk to for sure.


    _________________
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Wed Apr 20, 2011 11:38 pm

    I see lol I definitely will
    avatar
    dragkota
    Admin

    Posts : 526
    Reputation : 7
    Join date : 2011-03-24
    Location : picayune ms

    Re: 96 tacoma re-notch

    Post by dragkota on Thu Apr 21, 2011 1:55 am

    look At ya boy lookin like a freak sho


    _________________
    /I<3CAMBER\

    avatar
    static_fronti

    Posts : 604
    Reputation : 14
    Join date : 2011-03-25
    Age : 29
    Location : Picayune

    Re: 96 tacoma re-notch

    Post by static_fronti on Thu Apr 21, 2011 7:03 am

    git er done! Haha, nah it's lookin good. Ready to see the finale


    _________________
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Sun Apr 24, 2011 11:50 pm

    You and me both ryan lol
    avatar
    97_noma_dragger

    Posts : 102
    Reputation : 0
    Join date : 2011-03-29
    Age : 28
    Location : Pearl River, LA

    Re: 96 tacoma re-notch

    Post by 97_noma_dragger on Sun Apr 24, 2011 11:52 pm

    veezy! hows it comin big dawg?
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Sun Apr 24, 2011 11:54 pm

    Its coming man. I got the notch on now just working on getting everything ready to put back together
    avatar
    DMAC
    Admin

    Posts : 1041
    Reputation : 7
    Join date : 2011-03-24
    Age : 27
    Location : Picayune, Mississippi

    Re: 96 tacoma re-notch

    Post by DMAC on Mon Apr 25, 2011 12:02 am

    Take your time. Perfection.


    _________________
    avatar
    97_noma_dragger

    Posts : 102
    Reputation : 0
    Join date : 2011-03-29
    Age : 28
    Location : Pearl River, LA

    Re: 96 tacoma re-notch

    Post by 97_noma_dragger on Mon Apr 25, 2011 12:04 am

    listen to dmac, i was in a big hurry to do mine thats why im redoing shit now!take ur time do it right so u dont have to do it again and again!
    avatar
    DMAC
    Admin

    Posts : 1041
    Reputation : 7
    Join date : 2011-03-24
    Age : 27
    Location : Picayune, Mississippi

    Re: 96 tacoma re-notch

    Post by DMAC on Mon Apr 25, 2011 12:05 am

    You don't have much left though mark


    _________________
    avatar
    97_noma_dragger

    Posts : 102
    Reputation : 0
    Join date : 2011-03-29
    Age : 28
    Location : Pearl River, LA

    Re: 96 tacoma re-notch

    Post by 97_noma_dragger on Mon Apr 25, 2011 12:10 am

    alot more then one may realize my man. i was just tellin veezy im about to move my air tank and compressor under the bed, put the fuel tank under the bed, trailer fenders, box in the notch, add shocks, guages to watch everything, new switchbox, plate the lower control arms, do the body work get it primed all before the coast, then theres much more needing to be done after that
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Mon Apr 25, 2011 12:21 am

    dude there was so much shit on my truck that was done wrong that im going back over and redoing
    avatar
    DMAC
    Admin

    Posts : 1041
    Reputation : 7
    Join date : 2011-03-24
    Age : 27
    Location : Picayune, Mississippi

    Re: 96 tacoma re-notch

    Post by DMAC on Mon Apr 25, 2011 3:41 am

    How much do think your dad will charge me to Spray my truck?


    _________________
    avatar
    GrantH

    Posts : 93
    Reputation : 0
    Join date : 2011-04-06
    Age : 31
    Location : Hattiesburg, MS for now.

    Re: 96 tacoma re-notch

    Post by GrantH on Mon Apr 25, 2011 10:30 am

    Don't put them perfectly parallel man, you want the uppers to be at an angle where the end that mounts on the crossmember is lower than the axle. This puts what they call your "instant center" at the front of your truck, roughly.
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Mon Apr 25, 2011 10:34 am

    That's what I did and I checked for any pinion angle change and it didn't move
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Mon Apr 25, 2011 12:50 pm

    I just put my axle in and put my four link back on and checked for pinion angle change and its pretty much perfectly straight, no change
    avatar
    static_fronti

    Posts : 604
    Reputation : 14
    Join date : 2011-03-25
    Age : 29
    Location : Picayune

    Re: 96 tacoma re-notch

    Post by static_fronti on Mon Apr 25, 2011 1:58 pm

    sweet


    _________________
    avatar
    foreman

    Posts : 109
    Reputation : 1
    Join date : 2011-03-27

    Re: 96 tacoma re-notch

    Post by foreman on Mon Apr 25, 2011 2:00 pm

    Hell yeah dude its looking good
    avatar
    Hogg

    Posts : 149
    Reputation : 0
    Join date : 2011-03-28
    Age : 31
    Location : Columbia

    Re: 96 tacoma re-notch

    Post by Hogg on Tue Apr 26, 2011 12:24 am

    Here is how my two link looks.

    [img][/img]

    [img][/img]

    Sponsored content

    Re: 96 tacoma re-notch

    Post by Sponsored content


      Current date/time is Mon Sep 24, 2018 9:43 am