Kenny's Frontier came in with a crappy aim bolt on rear setup(short link bars, not nearly enough triangulation, not capped in notch, etc...) We are trying to help him out by salavaging as much of the old as possible while making it work correctly and perform safely
bundle of wiring (not Aims doing)
Notch after getting it ready to box in
inside of notches capped in
notch boxed in and finished out
[img]http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182411_10150177347957656_108389362655_8674248_1119298_n.jpg[img]
extended lower link bars and bent em to clear frame so bigger wheels can be run since it had a big notch
modified the gastank xmember from the kit so the wishbone setup could mount to it
modified the bag xmember both upper and lower
factory tank mount was missing since they had tank in bed so i fabbed one that raises the tank up above frame
had to soldier and heat shrink the gas tank harness since it was cut and tied back together when extended to go in bed
bracket to hold the rear brake proportion valve
Fab work complete other than tank,compressors, and valve mounts... Everything clamped or a bracket fabbed and welded on not zip tied
bundle of wiring (not Aims doing)
Notch after getting it ready to box in
inside of notches capped in
notch boxed in and finished out
[img]http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182411_10150177347957656_108389362655_8674248_1119298_n.jpg[img]
extended lower link bars and bent em to clear frame so bigger wheels can be run since it had a big notch
modified the gastank xmember from the kit so the wishbone setup could mount to it
modified the bag xmember both upper and lower
factory tank mount was missing since they had tank in bed so i fabbed one that raises the tank up above frame
had to soldier and heat shrink the gas tank harness since it was cut and tied back together when extended to go in bed
bracket to hold the rear brake proportion valve
Fab work complete other than tank,compressors, and valve mounts... Everything clamped or a bracket fabbed and welded on not zip tied